1215V Processor DBX
1215 Dual Channel 15-Band Equalizer The 1215 provides standard features like dual channels, 15 2/3 octave bands, +/-12 dB input gain range and switchable 40Hz/18 dB per octave low-cut filters.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments and chassis/signal ground lift capabilities for quick hum isolation.The visionary design of the dbx 12 Series makes your job easier.
• Switchable boost/cut ranges of ±6 or ±15 dB
• Electronically balanced/unbalanced inputs
• Servo balanced/unbalanced inputs
• RF filtered inputs and outputs
• XLR, Barrier Strip, and 1/4" TRS connectors
• -12dB/+12dB input gain range
• 18dB/octave 40Hz Bessel low-cut filter
• Chassis/signal ground lift capability
• Internal power supply transformer
• Power-off hardwire relay bypass with 2-second power-up delay
| Brand | DBX |
|---|---|
| Model | 1215V |
| I/O | • input Electronically balanced/unbalanced, RF filtered / Output Impedance-balanced/unbalanced, RF filtered |
| Input Connector | 1/4"" TRS, female XLR (pin 2 hot) |
| Output Connector | 1/4"" TRS, male XLR (pin 2 hot) |
| No. of Frequency Band | • Dual 15-band |
| Bypass Switch | • Bypasses the graphic equalizer section in the signal path |
| Low Cut Switch | • (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter |
| Limitter | • No |
| Ranges Switch | (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range |
| Noise Reduction | • No |
| AFS | •No |
| Crossover Filter Type | •No |
| Phase Invert Switch | •No |
| Mode Switch | •No |