A 435-watt, four-channel, full-range powerhouse, the GX-A604 – with on-board variable electronic crossovers and variable Bass EQ on the rear channels – is certainly a versatile system building tool. With all that power inside a 2-1/16" (52mm) high, 8-1/8" (206mm) wide and 11 13/16" (300mm) deep package, the GX-A604 is easy to install yet can serve as the foundation of a truly sophisticated sound system. Features include a cast-aluminum heat sink, built-in electronic crossover networks and bass boos circuits.
- Equipped with both low-level and high-level inputs
The GX-A604 is equipped with both low-level and high-level inputs, allowing conncetion to virtually any factory or aftermarket head unit. Low-level input is made via standard RCA connectors and high-level inputs made via a supplied Molex connector and harness. - Electronic crossover
The 12dB per octave electronic crossover is fixed at 80Hz and can be selected either high-pass or low-pass. This allows the GX-A602 can be used as a an amplifeir to drive full-range speakers or as a subwoofer amplifier. - Bass Boost circuit
The GX-A604 also has an switchable bass boost circuit on the rear channels that adds a fixed at 45Hz and will provide+12dB of gain.
Brand | JBL |
---|---|
Model | GX-A604 |
Power/Channel at 2Ω | 85 Watts RMS x 4 channels |
Power/Channel at 4Ω | 60 Watts RMS x 4 channels |
Sensitivity | Input : 20mV-20V |
Frequency Response | 20Hz-20kHz |
Signal-to-Noise Ratio | 93dB |
Power Output | Total Peak : 435W, Bridged : 170W x 2 into 4 ohms |
Warranty | 1 Yrs |